Xantrex Technology RC/GS RC7 Generator Stop (RC/GS Only)

Configuring the RC/GS and RC7
975-0210-01-01 19
The generator can be started or stopped at any time by
pressing the down arrow button until the Gen Start/Stop
menu is displayed. Press and hold the On/Off button until you
hear a beep from the RC/GS. Release the button after the
beep sounds.
If the inverter/charger senses an AC supply and the battery
voltage is below the automatic start setting, the generator
does not start. When you start the generator with the On/Off
button, the generator starts even if an AC supply is present.
Generator Stop (RC/GS Only)
The RC/GS can be configured so that the RV Series Inverter/
Charger stops the generator automatically when the charger
initiates the Absorption or the Float mode of charging. Refer
to the RV Series Inverter/Charger Owner’s Manual for a
detailed description of charging modes. The default is
Manual (Push Off).
Important: If the generator is manually started from the
remote, a manual override is initiated and the generator will not
stop automatically. Shut down the generator manually.
Figure 3-13 Generator Start/Stop
Figure 3-14 Generator Stop menu items
On / Off
Gen Start/Stop
Press (ON/OFF)
Generator Stop:
Manual (Push OFF) Generator Stop:
Auto at Absorb
Generator Stop:
Auto at Float
RC-GS_manual.book Page 19 Thursday, May 26, 2005 4:58 PM