Xantrex Technology Solar 400 manual Recharging From the Solar Panel

Models: Solar 400

1 66
Download 66 pages 48.53 Kb
Page 33
Image 33
Recharging From the Solar Panel

Recharging the Powerpack Solar 400 Battery

Recharging From the Solar Panel

The solar panel is very convenient in places where you do not have access to AC or DC sources for charging. You can take the Powerpack Solar 400 with you and use the solar panel to charge it during the day when sunlight is available and have some power available in the night depending on how much energy was stored in the battery.

The 5 W solar panel is made of amorphous silicon material and mounted on the front side panel of the unit. The solar panel itself can be detached from the unit to allow you to position it better to catch direct sunlight.

The solar panel is connected to the charging assembly via an electrical cord that is joined together by male/female connectors.

Male plugs

Female receptacles

Unit’s male/female connector

To reconnect the solar panel to the unit:Manual background Solar panel’s male/female Manual background connector

Figure 3-3Male/female Connectors

To reconnect the solar panel to the unit:

1.Align the male plug of the solar panel’s connector to the female receptacle of the unit’s connector.

2.Align the female receptacle of the solar panel’s connector to the male plug of the unit’s connector.

3.Push the two connectors together until they are securely joined.

975-0328-01-01

17

Page 33
Image 33
Xantrex Technology Solar 400 manual Recharging From the Solar Panel, To reconnect the solar panel to the unit