Operation
Charging Devices via the USB Port
1. Press and hold the DC/USB button for one second to activate the USB port.
2. Check the |
|
the battery is fully charged. | 1. |
|
3. Plug the USB device using a USB cable (not supplied) to the USB port on the side of the unit.
4. Unplug the USB device when fully charged.
5. Press and hold the DC/USB button again to deactivate the DC socket.
Note: Recharge the Powerpack as soon as battery level dips below normal.
Figure
Low Battery Alarm
While in use, when the battery reaches 11 Vdc, the
When the battery reaches 10.5 Vdc, the unit will automatically disconnect power to the USB outlet.
If the alarm sounds, disconnect any loads that may be in use and recharge the unit as soon as possible.
28 |