Xantrex Technology Solar 400 manual Interpreting Display Codes, Checking Battery and AC Status

Interpreting Display Codes

Interpreting Display Codes

Displays the

Battery Charge (%)

Displays an error code. See Table 5-2, “Display Error Codes” on page 39.

Figure 3-5Different Display Codes

Displays the

Output Power (W)

Checking Battery and AC Status

When either of the AC sockets, DC socket, or lamp is initially turned on, the digital display window flashes the different states of the battery charge and AC output power. The display automatically shuts off after 30 seconds to conserve energy from the internal battery.

While in use, pressing any of the buttons abruptly will also momentarily flash the different states of the battery charge and AC output power for 30 seconds.

Note: The Digital Display shows battery level and output power information. It flashes for 30 seconds before turning off automatically. It shows:

•the symbol -P-before displaying the inverter’s Output Power in W (0 to 400 W) and

•the symbol -C-before displaying the Battery Charge capacity status in % (40 to 100) or Lo when capacity is below 40%.

Error codes are displayed as the error occurs. See Table 5-2, “Display Error Codes” on page 39

975-0328-01-01 19