Installation (continued)
Cable Installation into Fuse Block
For Fuse Blocks designed for C-Type Battery Cables (TFBxxxC)
1.Strip back 1 inch (2.5 cm) of the insulation on the battery cable.
2.Insert the cable into the terminal block (ensure all conductor strands are in the block)
See Figure 3.
3.Tighten the hex screws to
4.Repeat Steps 2 and 3 for the connection to the other end of the fuse block.
Stripped
back 1 inch
Figure 3
Installation for C-Type Battery Cables
©2002 Xantrex Technology Inc. All Rights Reserved | 7 |
P/N