Xerox 10 manual Software component Installer location on the CD-ROM Command

3.If applicable, select a language for the administrative installation (not necessary if setup language was specified in the command line).

4.During installation, specify a target network location for the administrative image to be created.

5.Share this location (Software Distribution Point).

Software components and their installer locations for the Special Edition:

	Software component	Installer location on the CD-ROM	Command
1	PaperPort 11 SE	PP11SE\PaperPort	SETUP /A
2	OmniPage SE 16	OPSE16\OmniPage	MSIEXEC /A
3	Image Retriever 9	IR90PRO	SETUP /A
4	PaperPort Image Printer	PP11SE\PaperPort\PrinterDriver	SETUP /A

Software components and their installer locations for the Professional Edition:

		Software component	Installer location on the CD-ROM	Command
1		PaperPort Professional 11	PP11PRO\PaperPort	SETUP /A
2		OmniPage Professional 16	OP16PRO\OmniPage	MSIEXEC /A
3		Image Retriever9	IR90PRO	SETUP /A
4	PaperPort Image Printer		PP11PRO\PaperPort\PrinterDriver	SETUP /A
5		RealSpeak Solo	RSSOLO	SETUP /A
6		SharePoint Link	PPLINKS\SP	SETUP /A
7		ODMA Link	PPLINKS\ODMA	SETUP /A
8		PDF Converter Professional 5	PDFCONV5PRO\<os>\PDFProfessional	SETUP /A

Note

∙PDF Converter Professional 5 and PaperPort Image Printer have 32- and 64-bit versions. They are located at the folders <System32 or System64>, respectively. Use the ones appropriate for your target operating system.

10 of 19