Xerox 2060 manual Output tray, Capacity

Printer components and options

7.Transport module

8.Tray 3

9.Tray 2

10.Tray 1

11.Upper door

Input tray capacity Tray capacity for the input trays is:

•Trays 1 and 2 hold 550 sheets of 24-pound or 90 gsm bond paper.

•Tray 3 holds 2200 sheets of 24-pound or 90 gsm bond paper.

NOTE: For special stock, use tray 3.

	All three input trays have buttons to specify weight. In addition,
	tray 3 has selections for paper size (Non Standard or Standard),
	and the paper type (Coated or Uncoated). You must use these
	specifications for the printer to print properly. For the procedure
	on loading paper and specifying the weight, paper size and
	paper type, refer to the Guide to Performing Routing
	Maintenance, “Paper trays” chapter.
	NOTE: Although the tray input buttons for the DocuColor 2060
	require you to specify weight, you also specify media weight
	when using the Set Tray command at the printer controller. The
	buttons on the tray require you to specify weight in gsm, whereas
	the Set Tray command allows you to use any unit of
	measurement for weight. Therefore, the number you specify on
	the tray, and the number you specify using Set Tray may be
	different numbers, while still referring to the same actual weight.
	Additionally, Set Tray allows you to specify 0 to indicate no
	preference.
Output tray	The offset catch tray holds 500 sheets of 24-pound or 90 gsm
capacity	bond paper.
	If you have the optional high-capacity stacker (HCS) or high-
	capacity stacker stapler (HCSS), the built-in top tray in these
	devices replaces the standard offset catch tray. Refer to the
	“Printer options” section for information on these optional
	stackers.

3-2 System Overview Guide