Xerox 2060 manual Perforated paper, Paper care

Supplies

•Letterhead: Different inks and dry inks are used to produce preprinted letterhead that may not pass through the printer intact. It is recommended that you run a sample job through the printer to determine output quality. The loading orientation of letterhead paper depends on how the job is programmed. It is recommended that a sample job always be run first to determine output quality.

•Tabbed inserts: Can be loaded into tray 3 as non-standard paper. Tabbed inserts can be run from, but are not recommended for, the optional tray 4 as non-standard paper.

When loading, the non-tabbed, short edge of the tabbed insert should be the lead edge to the printer.

•Predrilled paper: Has a varying number of holes for use in binders or binder rings. Before loading predrilled paper, fan it to remove loose plugs that could cause paper jams.

–Simplex print jobs: Load the drilled paper into trays 1, 2, or 3 with the holes positioned toward the rear of the paper tray.

–Duplex print jobs: Load the drilled paper into trays 1, 2, or 3 with the holes positioned toward the front of the paper tray.

•Perforated paper

•Non-standard size paper: Paper (7.2 to 12.6 [LEF] or 7.2 to 19.2 [SEF]) can be loaded into tray 3 and optional tray 4. Ensure that non-standard size paper is selected on tray 3 and optional tray 4.

•Oversize paper: Paper (12 x 18” [SEF] or 12.6 x 17.7” /SRA3 [SEF]) can be loaded in trays 1 and 2 after the paper guides are removed by a Xerox service representative.

Paper care

Once you have purchased your paper, you must be sure it is stored and conditioned properly, so that it performs optimally in the printer with a minimum of jams.

A-4 System Overview Guide