Printer components and options
Touch screen
The touch screen displays messages that indicate the status of the printer during idle, run, or fault conditions.
The touch screen displays the default screen selected in the Tools Mode by your system administrator. The default screen can be either the Basic Features, Job Status, or Machine Status screen. For information on the Tools Mode, refer to the Guide to Performing Routing Maintenance, “Default settings” chapter.
NOTE: For most functions, you will use the printer controller rather than the Touch Screen.
Message area
The message area at the top of the touch screen displays messages concerning the printer status, programming conflicts, or errors. The messages may also provide instructions for the operator.
Tabs, buttons, and icons
Some screens on the touch screen display tabs that contain various selectable options.
Features and options are initially set to the factory default settings. These settings can be changed by your system administrator in Tools mode.
System Overview Guide |
