Xerox 3400 manual Using the Macintosh installer, Setting up the printer when using a USB cable

Using the Macintosh installer

Use the installer application to automatically install the PostScript PPD onto your computer's hard disk.

1.Insert the Phaser 3400 printer's CD-ROM into your computer's CD-ROM drive.

2.Double click the CD-ROM icon.

3.Double click the folder for your language.

Folder	Language
DE	German
EN	English
ES	Spanish
FR	French
IT	Italian
PT	Portuguese

4.Double click the Installer icon.

5.On the introductory screen, click the Continue button.

6.Read the installation notes, then click the Continue button.

7.In the Installer dialog box, click the Install button.

8.Either set up the printer in the Chooser or on your desktop (if your computer is connected to the printer with a USB cable). Refer to the following section for more information if using a USB cable.

Note

To print, you must also have the LaserWriter 8 printer driver installed. If needed, run the LaserWriter 8 installer, which is available on the printer CD-ROM.

Setting up the printer when using a USB cable

1.Locate the Desktop Printer Utility in the Apple Extras folder.

2.Double click the Desktop Printer Utility.

User Guide 13