Xerox 4215/MRP manual Mapping of PostRenderingEnhanceDetails to

POSTSCRIPT MODE

Line edge enhancement Specified by the PostRenderingEnhance and PostRenderingEnhanceDetails parameters. The image enhancement options and the control panel mapping are shown in table 1-3.

Table 1-3.		Mapping of PostRenderingEnhanceDetails to
		control panel selection
	Key	Value	Function	Control panel display
	Revalue	0	LEE off	Disable
		1	LEE light	Light
		2	LEE medium	Medium (default)
		3	LEE dark	Dark
	Type	10	Constant	N/A

Outputfaceup stacking Each output tray accommodates only one method of stacking. Pages are always stacked face up on the face-up tray and face down on the top tray and the high-capacity stacker. The outputfaceup values should correspond to the current output tray (true for output to the face up tray, and false for output to the top tray and high-capacity feeder).

Paper offset Specified by the Jog parameter, as shown in table 1-4.

Table 1-4.		Mapping of Jog to the printer offset control
		panel functions
	Integer	Function	Control panel display
	0	Do not jog	Disable
	1	Jog at device	Other setting from host is
		deactivation	active
	2	Jog at end of job	On job
	3 (default)	Jog after each set	On job and copy

The value of Jog in the page device dictionary is ignored for the face-up tray. Paper cannot be physically shifted at this output location.

Multiple copies Specified by the NumCopies parameter. Multiple copies are delivered uncollated.

XEROX MRP FAMILY PCL 5 AND POSTSCRIPT PRINTER LANGUAGE REFERENCE 1±7