Xerox 4215/MRP Paper Destination, Syntax E& #G, Paper destinations, Printer, equivalent, N Notes

HP LASERJET EMULATION MODE

Paper Destination

Purpose Use this command to specify the paper destination. The printer supports the HP IIISi implementation of the Paper Destination command.

Syntax E& #G

where # is one of the values listed in Table 2-4.

Table 2-4.	Paper destinations
		Printer
#	HP	equivalent
1	Upper Output Bin	Top Tray
2	Lower Output Bin	Face-Up Tray

Additional information The printer lets you select which output tray is used when the HP Upper Output Bin command is received. You do this with the Output Destination to Command Assignment feature that you can select from the control panel. The Output Destination to Command Assignment feature lets you assign the command to one of the following output trays:

·Top tray

·Face-up tray

·High-capacity stacker (option)

NNotes:

·The high-capacity stacker option allows only letter, executive, and A4 paper sizes. For all other sizes the default must be the top tray in this configuration.

·Any job that is fed from tray 5 is always output to the face-up tray.

·The HP Rear Output Bin command is fixed to the face-up tray destination.

2-6 XEROX MRP FAMILY PCL 5 AND POSTSCRIPT PRINTER LANGUAGE REFERENCE