POSTSCRIPT MODE
Resources
PostScript Level 2 allows you to manage objects such as fonts, patterns, and filters as collections of resources grouped into categories. A resource can be requested by giving the resource category and name. The Resource categories supported by the printer are described in the PostScript Language Printer Addendum, Xerox 4220/MRP, 4230/MRP.
Compatibility operators
A set of compatibility operators is present in the printer for Level 1 compatibility purposes only. Their use in PostScript Level 2 language programs is not recommended. Refer to the PostScript Printer Language Addendum, Xerox 4220/MRP, 4230/MRP for more information.
Miscellaneous PostScript features
The PostScript features described in this section are described in detail in the PostScript Language Printer Addendum, Xerox 4220/MRP, 4230/MRP, or in the PostScript Language Supplement. Please refer to these books for further information.
Communications setup Communications parameters in the different interfaces can be set from the host. The serial defaults are shown in table
Table | Communications defaults for the serial | |
| interface |
|
|
| |
Communications parameter | Default | |
|
|
|
Flow control |
| Robust XON/XOFF |
|
| |
Baud rate (bps) | 9600 | |
|
|
|
Data bits |
| 8 |
|
|
|
Stop bits |
| 1 |
|
|
|
Parity |
| None |
|
|
|
Fax setup To set up and control fax operations, refer to the sections on covering fax and device parameters in the PostScript Language Printer Addendum, Xerox 4220/MRP, 4230/MRP.
Timeout features To obtain and set current timeout values, refer to the sections on Systems, User, and Page Device parameters in the PostScript
XEROX MRP FAMILY PCL 5 AND POSTSCRIPT PRINTER LANGUAGE REFERENCE | 1±9 |
