Xerox 4215/MRP manual Page Size, Syntax E& #A

HP LASERJET EMULATION MODE

Additional information When a Paper Source command is sent within a print job, the Input Tray to Command Assignments feature is used. The Input Tray to Command Assignments feature allows you to select which tray is used for the HP Upper Tray, Lower Tray, Manual Envelope Tray, and Paper Deck paper source commands.

When the Xerox printer receives the command E& #H in the middle of a job, printing stops, the page is ejected, and the next page feeds as specified by the command.

When the printer receives the paper source command E& 0H in the middle of a job, the current page is ejected and the next page feeds as specified by the command.

With Auto-Tray switching enabled, if a document with both paper source and paper size commands requests paper from a tray that contains a different size of paper from that requested, the printer automatically selects a paper tray (from trays 4, 1, and 2) with the correct paper size. If the paper size is not available in any of these trays, a control panel message prompts you to load the correct paper size into tray 5. However, you can also use the control panel to continue printing with the paper size that is already loaded.

If Auto-Tray switching is disabled, only the selected paper tray is examined for the correct size. If the paper size is not correct, a control panel message prompts you to load the correct size. You again have the option of using the control panel to continue printing with the wrong size.

Page Size

Purpose Use the Page Size command to determine the physical size of paper to use.

Syntax E& #A

where # is one of the values listed in table 2-2.

2-4 XEROX MRP FAMILY PCL 5 AND POSTSCRIPT PRINTER LANGUAGE REFERENCE