NOTICES
Laser safety
Your printer complies with appropriate safety standards.
Specifically regarding lasers, the equipment complies with laser product performance standards set by governmental, international and national agencies as a Class 1 laser product. It does not emit hazardous light; the beam is totally enclosed during all phases of customer operation and maintenance.
WARNING: Use of controls or adjustments or performance of procedures other than those specified herein may result in hazardous radiation exposure.
Be aware of all labels that warn you against removing panels or covers. See the example below of a label located behind the front cover, below the on/off switch.
DANGER - Invisible laser radiation when open and interlock defeated for service.
AVOID DIRECT EXPOSURE TO
BEAM
Instructions for safe service are in SERVICE MANUAL.
These laser warning labels are placed on panels that cover areas that are not operator serviceable. These panels are not to be removed.
Operational safety
Your Xerox equipment and supplies are designed and tested to meet strict safety requirements. These include safety agency examination, approval, and compliance with established environmental standards.
Attention to the following notes ensures the continued safe operation of your equipment.
Do this
Always connect equipment to a properly grounded power source receptacle. If in doubt, have the receptacle checked by a qualified electrician.
WARNING: Improper connection of the equipment grounding conductor can result in electrical shock.
Always place equipment on a floor with adequate strength for the weight of the machine.
Always have your qualified service representative move or relocate the equipment.
Always use materials and supplies specifically designed for your
Xerox equipment.
iv | XEROX MRP FAMILY PCL 5 AND POSTSCRIPT PRINTER LANGUAGE REFERENCE |