2How do I start using Remote Services?
After your Xerox customer representative installs and configures Remote Services, you can immediately access the Home page. The Home page provides links to all application features included within Remote Services.
NOTE: For Remote Services registration information, please refer to the Remote Services Setup Guide.
You can use the following links to access topics discussed in this section:
Remote Services network configuration
User access
Launching the Remote Services application
Home page navigation
Remote Services network configuration
Before Remote Services is ready to provide full service, settings for your network configuration need to be verified by your Xerox customer service representative. If your system uses a proxy server, settings to enable the network connection are defined as follows:
1.Open the [Remote Services Home: Setup: Network Settings] page.
2.Enter the HTTP Proxy Server, HTTP Proxy Port, user name and password.
3.Click [Apply New Settings].
Additionally, your customer service representative must verify settings for IP Address, Netmask, Gateway and DNS Host on the [Remote Services Home: Setup: Network Settings] page. As these settings are
Once these settings are configured, Remote Services is ready to provide full network service.
User Guide | 3 |
