Manuals / Xerox / Computer Equipment / Printer

Xerox 701P47409 manual Setting the font resolution

Models: 701P47409

1 32

Download 32 pages 50.3 Kb

Page 17

Setting the font resolution

Setting the font resolution

Before printing MICR jobs, you must set the resolution attribute appropriately for the queue to which you will be sending the jobs.

The following table lists the different MICR font formats and the resolution at which each font should be printed.

Table 1-3. MICR Font formats

Font name and format	Required resolution

E13B

LCDS

PS

PCL

300 DPI

300 DPI and 600 DPI

300 and 600 DPI

CMC7

LCDS

PS

PCL

300DPI

600DPI

600DPI

If your document contains scalable fonts or simple line art generated at 600 dpi, the differences between printing at 300 or 600 dpi are subtle. However, if your document contains bitmaps with a resolution of 600 dpi, printing at 300 dpi causes a degradation of image quality. To preserve image quality, regenerate the bitmaps at 300 dpi.

NOTE: PCL and PostScript fonts must be printed at the correct queue resolution and with the correct resource resolution, or errors will occur. In PCL, this causes a minro spacing error. In PostScript, subtle but significant character distortions occur. See Selecting Fonts for more information.

For the Nuvera MX printers, a 300 DPI queue is not an available option. Printing using the 1200 DPI queue works fine as long as the 600 DPI fonts are used.

MICR User Guide

13

Image 17

Xerox 701P47409 manual Setting the font resolution

Contents

Version 6.0, July 2007 701P47409 MICR User GuideXerox FreeFlow Print Server Prepared by Xerox Corporation MICR User Guide Table of contentsMICR User Guide Table of contentsMICR MICR featuresDatastreams MICR system differences MICR PrintersMICR fonts provided MICR fontsPostScript fonts PCL fontsMedia for the MICR fonts IPDS fontsMICR Fonts CD-ROM CMC74J.FNT CMC74L.FNT CMC74P.FNT E14BI.FNTMedia for IPDS fonts MICR fonts installationInstalling PostScript and PCL fonts your CD are listed Loading MICR fonts on a PC Installing LCDS fontsChecking the font version Selecting MICR fontsTable 1-2.Test Form Font Information MICR User Guide Figure 1-1.MICR Test FormSelecting PCL fonts Selecting PostScript fonts<ESC>0U<ESC>s0p8.00h9.00v0s0b0T ESC 1U ESC s0p8h9.1v0s0b0TYou can use the PCL Unit of Measure command to set the PCL Unit to 600 for example, ESC &u600D. Alternatively, you can override the resolution to 600 dpi in the queue. Refer to “Setting the font resolution,” later in this chapter, for information on setting the resolution in the queue Setting the font resolution Changing font resolution for a job Setting the font resolution for the queueImage quality for PCL Using AFP fonts for IPDS printingImplementing AFP MICR fonts Existing IBM MICR implementationNew MICR implementation MICR application resourcesCustom MICR font application Existing Xerox MICR font applicationMICR forms Security featuresAvailable MICR test forms PostScript test formsCMC7 600 dpi E13B 300 and 600 dpiLCDS test forms E13B 300 dpiPrinting MICR test forms Setting up a test forms queuePrinting PostScript and PCL test forms CMC7 300 dpiFrom Print from File Printing LCDS MICR test formscd /opt/XRXnps/XRXdatv/data Example: /usr/ucb/lpr - P MICRTest -#20MICRSA.psMICR User Guide 7.Click OK to print the test formAdditional information Physical access to the printerMICR output verification tools SecurityResponsible presence Controlling access to critical filesSecuring paper stocks Logon levels Software securitySecure Mode Clearing jobsDeleting a job Audit control proceduresIneligible jobs MICR User Guide