Image quality for PCL
The MICR fonts provided with the MX printers have been optimized for MICR printing on these systems. Therefore, it is important that darkening of the bitmap font is disabled when printing PCL MICR documents. To ensure that bitmap font darkening is disabled, follow these steps:
1.Log on as Administrator.
2.Select the Printer
3.In the Raster Image Processors list, do one of the following:
•If you are using the 300 dpi font (for example, E13B- P.HPP),
•If you are using the 600 dpi E13B font (for example, E13B- 609.HPP) or the CMC7 font (for example, CMC72510.HPP),
The PCL Image Quality window opens.
4.In the Thickening Control section, if the Bitmap Fonts check box is selected, deselect it. Click OK.
5.If changes were made, a Restart confirmation prompt appears. Click Yes to restart the Xerox FreeFlow® Print Server software.
Using AFP fonts for IPDS printing
Implementing AFP MICR fonts
To implement the Xerox AFP MICR fonts in your existing IBM MICR application, perform the steps from the following appropriate section.
For information on installing the Xerox AFP MICR fonts, refer to Installing Xerox AFP MICR Fonts, delivered with your MICR system.
Existing IBM MICR implementation
1.Install the Xerox MICR fonts on the host AFP system.
2.Ensure that all other fonts used for MICR applications have been converted to 300 dpi and loaded into the 300 dpi font library.
3.Substitute the Xerox 300 dpi AFP MICR fonts for the line- named IBM originals.
MICR User Guide | 15 |
