Xerox 701P47409 MICR fonts provided, PostScript fonts, PCL fonts, LCDS fonts, •CMC74I.FNT

MICR fonts

The Xerox-supplied MICR fonts are required to optimize the quality of the MICR line and ensure excellent performance. It is critical that the font character raster patterns and metrics are not modified in any way and that no new characters are added.

NOTE: Xerox MICR fonts must be used. They may not be modified in any way.

MICR fonts provided

Xerox provides sets of E13B and CMC7 MICR fonts for PostScript, PCL, LCDS, and IPDS. The following sections describe the fonts that you receive.

PostScript fonts

You receive the following PostScript MICR fonts:

•E13B9.PFB: 9-point, 600 dpi E13B. This font can be loaded and viewed on your PC. Refer to “Loading MICR fonts on a PC,” later in this chapter, for the procedure.

•E13B.PFB: 9.12-point, 600 dpi E13B

•E13B.PS: 9.12-point, 300 dpi E13B

•CMC72510.PFB: 9.06-point, 600 dpi CMC7

NOTE 1: Use the 9.12 point, 600 dpi E13B font for compatibility with 300 dpi data. These fonts must be implemented at this exact point size in order to print MICR characters with the correct dimensions and spacing.

NOTE 2: The E13B.PFB and E13B.PS MICR fonts cannot be loaded on the printer at the same time. Refer to “MICR Fonts CD- ROM,” later in this chapter, for further details.

PCL fonts

You receive the following PCL fonts, all at 600 dpi resolution:

•CMC72510.HPP

•E13B-609.HPP

•E13B-P.HPP

LCDS fonts

You receive the following LCDS fonts, all at 300 dpi resolution:

•CMC74I.FNT

MICR User Guide 3