Xerox 8825, 8855, 8830 manual Document Properties Dialog Tabs, PAPER/OUTPUT Parameters, Paper Size

Driver Configuration (Document Properties Dialog)

Document Properties Dialog Tabs

This dialog consists of three Tabs: the Page Setup Tab, the Advanced Tab and the Job Tab. Select a Tab, change any parameters to the settings desired, then click the OK button for your changes to take effect and to return you to the application Print screen.

Advanced Tab Parameters

PAPER/OUTPUT PARAMETERS

Paper Size

This parameter displays the currently-selected paper size. To change the paper size to match your application’s page layout, left mouse click on Paper Size and make a selection from the available list in the bottom dialog box. The default paper size is Letter.

PostScript Custom Page Size - If you click on this selection from the list of available paper size settings, you can create Custom Page Size dimensions and modify the position of your printed page relative to the edge of the roll or sheet of media. Note that with roll fed media the paper feed direction is not applicable.

Figure 4. Typical Document Properties Dialog

XES Synergix 8825/8830/8850/8855 Windows NT 4.0 PostScript Print Driver User Guide 11