Document Properties Dialog (Advanced Tab Parameters)
Copy Count
This parameter displays the currently-selected number of copies to print. To change the Copy Count, left mouse click on Copy Count and enter a selection from 1 to 999 in the entry box supplied in the bottom dialog box. Note that although the driver supports 9999 copies, the printer is restricted to a maximum count of 999. The default copy count is 1.
Collate Copies
When you select Copy Count and make an entry of more than 1, the Collate Copies check box is enabled at the bottom of the dialog. If you would like to have copies printed out in 1-2-3, 1-2-3 order (depending upon your application), use your left mouse button to place a check mark in the Collate Copies box. The default for collation is off.
GRAPHIC PARAMETERS
Color Appearance
As the printer is a Monochrome device, the setting for Color Appearance is not important. If Monochrome is not the default, you may click on Color Appearance and select the Monochrome radio button at the bottom of the dialog.
Scaling
This parameter displays the currently-selected Scaling of the printed image. To change the scaling, left mouse click on Scaling and enter a selection from 10 - 999%, which is the scaling range supported by the printer. The default setting is 100%.
Note: If you are performing a large scale enlargement, be sure to manually select the appropriate Paper Size so that your image will fit onto one of the available rolls of media installed in the printer.
TrueType Font
This parameter displays the currently-selected option for printing with TrueType Fonts. To change the selection, left mouse click on TrueType Font and click on the appropriate radio button. If you would like to print with the TrueType fonts exactly as shown on your screen, select Download as Soft font. If you prefer substituting printer-resident PostScript fonts for your TrueType fonts, speeding up the printing process, select Substitute with Device Font. The default is Substitute
with Device Font.
Tip: To quickly view your system-installed fonts and the printer-resident fonts currently selected for substitution, go to “Start,” “Settings”, “Printers,” right mouse click on your PostScript printer icon, select “Properties,” and click on the Device Settings Tab. Double click on Font Substitution Table. To see a display of printer-resident fonts available for substitution, click on any font and a list will be displayed at the bottom of the dialog.
