Xerox 8855, 8825, 8830 Orientation, Paper Source, Automatically Select Manual Feed Roll, Media

XES Synergix 8825/8830/8850/8855 Windows NT 4.0 PostScript Print Driver User Guide 12

Document Properties Dialog (Advanced Tab Parameters)

Orientation

This parameter displays the currently-selected orientation of the printed document on the page. To change the printed document orientation, left mouse click on Orientation and make a selection from the available radio buttons in the bottom dialog box. Portrait prints the document vertically on the page. Landscape prints the document horizontally on the page. The rotated selection prints the document rotated as shown on the dialog. The default orientation is Portrait.

Paper Source

This parameter displays the currently-selected paper source. To change the paper source, left mouse click on Paper Source and make a selection from the available list in the bottom dialog box. The following paper source options are supported:

•Automatically Select

•Manual Feed

•Roll 1

•Roll 2

•Roll 3

•Roll 4

The default paper source is Automatically Select.

Media

This parameter displays the currently-selected media. To change the media, left mouse click on Media and make a selection from the available list in the bottom dialog box. The following media types are supported:

•Any

•Bond

•Vellum

•Film

The default media type is Bond.

Note: To tell your printer how to handle possible mismatches between the media type you select here and the media types actually installed in the printer, see the information presented in this User Guide under the Media Mismatch Mode feature.