Xerox NC60 - page 124

Using the Optional Media Server
3-72 ❖DocuPrint NC60 User Guide
To print from the Media Server:
1Create a PostScript or PCL 5C printer file . (You cannot
print an application file at the Media Server. You must use
the Print to File utility.) Save the printer file you created
on a standard High Density, 3.5-inch, MS DOS formatted
disk.
2Insert the disk into the Media Server’s disk drive as shown
in Figure 3.3 on page 3-71.
3Press Menu Up or Menu Down until you see:
4Press Item Up or Item Down until you see:
5Press Value Up or Value Down until you see:
6Press Enter when the file shown on the display window is
the file you want to print.
Menus
Media Server Menu
Media Server Menu
Select File
Select File
Filename