Moving Your DocuPrint NC60
1-16 ❖DocuPrint NC60 User Guide
Simple Move 1Power off the printer.
After turning off the printer, allow the Fuser
to cool to a safe temperature before handling.
2Disconnect the power cord and interface cables.
3Open the Front Cover (see page 1-12).
4Open the Top Cover (see page1-13) an d remove the Fuser
assembly.
5Place the Fuser in a separate box and do not allow the
Fuser to tip. Keep the Fuser level duri ng transportation.
It is critical to keep the Fuser level at all times
during transportation. Permanent damage can
occur to the printer if the Fuser is allowed to tip,
spill oil, and be placed back into the printer.
6Close the Top and Front Covers.
7When the printer arrives at its new location , reinstall the
Fuser assembly.
If there is evidence of oil on the outside of the
Fuser, or if you suspect oil has been spilled, DO
NOT PLACE THE FUSER INTO THE PRINTER. A new
Fuser should be installed.