How to Clear A Media Jam
Chapter 5: Troubleshooting 5-7
Fuser/Output
Area Jam
1Open the Front Cover. (See page 1-12.)
2Open the Fuser Cover. (See page 1-13.)
3Release the Roller by shifting the Release Lever as shown.
4Locate the lodged material by looking inside the Fuser
area.
Exercise caution as some internal printer
surfaces are hot.
Do not remove the Fuser to clear a jam.
If media wraps around a roller in the Fuser, replace
the Fuser. Use only recommended media.
Figure 5.2 Fuser/Output/Print Drum Area Jam
1 2
3