Xerox NC60 1, 2, 3

The Manual Bypass Feeder Slot

2-12 ❖DocuPrint NC60 User Guide

Media inserted in the Manual Bypass Feeder Slot overrides

the Paper Source selection in your driver. You can use this

to print a page (or cover) in a document set on a different

media than the remainder of the document. Simply insert

the media before the page is printed.

To print normally from the Manual Bypass Feeder Slot:

In your printer driver:

1Select Manual Feed as the Paper Source in the DocuPrint

NC60 printer driver.

2For envelopes or labels, select the correct option in the

Media Type in the DocuPrint NC60 printer driver.

At your printer:

3When prompted by the Control Panel message, place the

media print-side down on the Manual Bypass Feeder Tray.

Before you load a sheet of labels into the Manual

Bypass Feeder Slot, make sure that the edges of the

labels are not loose or sticking up. Loose edges can

get stuck when the sheet passes through the

printer and can cause jams that are difficult to

clear.