Caution: Read this before operating your unit.

1To assure the finest performance, please read this manual carefully. Keep it in a safe place for future reference.

2Install this sound system in a well ventilated, cool, dry, clean place – away from direct sunlight, heat sources, vibration, dust, moisture, and/or cold. Allow ventilation space of at least 30 cm on the top, 20 cm on the left and right, and 20 cm on the back of this unit.

3Locate this unit away from other electrical appliances, motors, or transformers to avoid humming sounds.

4Do not expose this unit to sudden temperature changes from cold to hot, and do not locate this unit in an environment with high humidity (i.e. a room with a humidifier) to prevent condensation inside this unit, which may cause an electrical shock, fire, damage to this unit, and/or personal injury.

5Avoid installing this unit where foreign objects may fall onto this unit and/or this unit may be exposed to liquid dripping or splashing. On the top of this unit, do not place:

–Other components, as they may cause damage and/or discoloration on the surface of this unit.

–Burning objects (i.e. candles), as they may cause fire, damage to this unit, and/or personal injury.

–Containers with liquid in them, as they may fall and liquid may cause electrical shock to the user and/or damage to this unit.

6Do not cover this unit with a newspaper, tablecloth, curtain, etc. in order not to obstruct heat radiation. If the temperature inside this unit rises, it may cause fire, damage to this unit, and/or personal injury.

7Do not plug in this unit to a wall outlet until all connections are complete.

8Do not operate this unit upside-down. It may overheat, possibly causing damage.

9Do not use force on switches, knobs and/or cords.

10When disconnecting the power cable from the wall outlet, grasp the plug; do not pull the cable.

11Do not clean this unit with chemical solvents; this might damage the finish.

12Only voltage specified on this unit must be used. Using this unit with a higher voltage than specified is dangerous and may cause fire, damage to this unit, and/or personal injury. Yamaha will not be held responsible for any damage resulting from use of this unit with a voltage other than specified.

13To prevent damage by lightning, keep the power cord disconnected from a wall outlet or the unit during a lightning storm.

14Do not attempt to modify or fix this unit. Contact qualified Yamaha service personnel when any service is needed. The cabinet should never be opened for any reasons.

15When not planning to use this unit for long periods of time (i.e. vacation), disconnect the AC power plug from the wall outlet.

16Install this unit near the AC outlet and where the AC power plug can be reached easily.

17Be sure to read the “Troubleshooting” section in the owner’s manual on common operating errors before concluding that this unit is faulty.

18Before moving this unit, press POWER downward to turn off this unit and then disconnect the AC power plug from the AC wall outlet.

19VOLTAGE SELECTOR (Asia and General models only) The VOLTAGE SELECTOR on the rear panel of this unit must be set for your local main voltage BEFORE plugging into the AC wall outlet. Voltages are:

................................AC 110/120/220/230–240 V, 50/60 Hz

20The batteries shall not be exposed to excessive heat such as sunshine, fire or like.

21Excessive sound pressure from earphones and headphones can cause hearing loss.

As long as this unit is connected to the AC wall outlet, it is not disconnected from the AC power source even if you turn off this unit by POWER.

WARNING

TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS UNIT TO RAIN OR MOISTURE.

This symbol mark is according to the

EU directive 2002/96/EC.

This symbol mark means that electrical and electronic equipment, at their end- of-life, should be disposed of separately from your household waste.

Please act according to your local rules and do not dispose of your old products with your normal household waste.

iii En

Page 53 Page 55
Page 54
Image 54
Yamaha A-S1000 owner manual Iii En
Page 53 Page 55

A-S1000 specifications

The Yamaha A-S1000 is a dedicated integrated amplifier that embodies exceptional craftsmanship, advanced technology, and an undying commitment to audio fidelity. Designed to cater to audiophiles, the A-S1000 combines vintage aesthetics with contemporary features, making it an attractive addition to any hi-fi setup.

One of the standout features of the A-S1000 is its robust power output. With a total of 90 watts per channel at 8 ohms, it delivers a dynamic range that can effortlessly drive a variety of speakers. This power is balanced with the amplifier’s high-current capability, ensuring that even the most demanding musical passages are reproduced accurately without distortion. The A-S1000's high-efficiency design ensures minimal energy loss, further enhancing its performance.

The amplifier also incorporates Yamaha’s exclusive ToP-ART (Total Purity Audio Reproduction Technology), which prioritizes the signal path to maintain audio integrity. This technology leverages a separate power supply layout for the left and right channels, effectively minimizing interference and delivering a cleaner, more detailed soundstage. Users can experience the subtle nuances of their favorite records, with a level of clarity that highlights the artistry of the music.

Another notable characteristic is the A-S1000’s high-quality components. The amplifier features a high-damping factor, which means better control over speaker motion, resulting in cleaner bass response and a more coherent sound. Furthermore, its premium-grade capacitors and heavy-duty construction contribute to its stability and longevity.

For connectivity, the A-S1000 is well-equipped with a range of inputs including phono, line, and digital sources. The inclusion of a dedicated phono stage allows vinyl enthusiasts to connect their turntables directly, enjoying the warm, rich sound that analog records provide. Additionally, the model supports pure direct mode, which bypasses unnecessary circuitry for a more direct signal, catering to audiophiles seeking the purest listening experience.

The A-S1000 also sports a beautifully designed aluminum front panel, which not only adds a touch of elegance but also enhances durability. The large, graduated knobs and clear display make operation intuitive, allowing users to adjust settings with precision.

In summary, the Yamaha A-S1000 is a quintessential integrated amplifier that merges powerful performance with aesthetic appeal. Its commitment to sound quality, combined with innovative technologies and versatile connectivity options, positions it as a worthy choice for anyone serious about high-fidelity audio. Whether powering a home theater system or a dedicated two-channel setup, the A-S1000 delivers an immersive listening experience that honors the true essence of music.
Top Page Image Contents