|
|
| INPUT | VOLUME |
| TREBLE | BALANCE | CD |
|
|
|
| TUNER | |
|
|
| LINE 1 | |
|
|
| LINE 2 | PHONO |
|
|
| MAIN DIRECT |
|
- | + | L | R |
|
|
|
|
| AUDIO MUTE |
3PHONES jack
Outputs audio for private listening with headphones.
Note
When headphones are plugged in:
–Both speaker sets connected to the SPEAKERS L/R CH A and B terminals are turned off.
–No signals are output at the PRE OUT jacks, while signals are output at the REC jacks.
–You cannot select MAIN DIRECT as the input source.
–If headphones are plugged into the PHONES jack while MAIN DIRECT is selected as the input source, no audio is output at the PHONES jack. Use the headphones jack of the preamplifier connected to the MAIN IN jacks.
4SPEAKERS
Turns on or off the speaker set connected to the SPEAKERS L/R CH A and/or B terminals on the rear panel.
•Switch to the OFF position to turn off both speaker sets.
•Switch to the A or B position to turn on the speaker set connected to the SPEAKERS L/R CH A or B terminals.
•Switch to the A+B
Caution
If you use two sets (A and B), the impedance of each speaker must be 8 Ω or higher. When only using one set of speakers (A or B), use speakers with an impedance of 4 Ω or higher.
