Yamaha A-S1000 16 En, Connecting the speakers using the banana plug, Except for Europe models

Connections

Caution

If you use two sets (A and B), the impedance of each speaker must be 8 Ω or higher. When only using one set of speakers (A or B), use speakers with an impedance of 4 Ω or higher.

■Connecting the speakers

1Remove approximately 10 mm (0.4 in) of insulation from the end of each speaker cable and twist the exposed wires of the cable together to prevent short circuits.

10 mm (0.4 in)

2Unscrew the knob and then insert the bare wire into the hole.

3Tighten the knob.

■Connecting the speakers using the banana plug

(Except for Europe models)

First, tighten the knob and then insert the banana plug into the end of the corresponding terminal.

Banana plug

■Connecting the speakers using the Y-shaped lug

1Unscrew the knob and then sandwich the Y-shaped lug between the ring part and base.

Y-shaped lug

Slide

2Tighten the knob.

16 En