Yamaha A-S1000 owner manual Connections, 14 En

Connections

Speakers A (R channel)

CD player

Tuner

+-

SPEAKERS R CH
A	INPUT			LINE2	MAIN IN PRE OUT
CD		TUNER LINE 1	PB	REC
R	L
	L
	R
B
PHONO
	MM	MC
		GND

+-

Ground

Speakers B (R channel)

Turntable	DVD player,
	etc.

Caution

•If you use two sets (A and B), the impedance of each speaker must be 8 Ω or higher. When only using one set of speakers (A or B), use speakers with an impedance of 4 Ω or higher.

•Do not let the bare speaker wires touch each other or do not let them touch any metal part of this unit. This could damage this unit and/or the speakers.

•All connections must be correct: L (left) to L, R (right) to R, “+” to “+”, and “–” to “–”. If the connections are faulty, no sound will be heard from the speakers, and if the polarity of the speaker connections is incorrect, the sound will be unnatural and lack bass. Also, refer to the owner’s manual for each of your components.

•Connect your turntable to the GND terminal to reduce noise in the signal. However, you may hear less noise without the connection to the GND terminal for some turntables.

14 En