AW1600 Owner’s Manual
116
11
Quick loop sampler
BPad track number
This indicates the pad track number 1–4. At the right is
displayed the name of the sample assigned to the sam-
ple bank selected for that pad.
CTrack mute button
This button switches muting on/off for each track.
Move the cursor to this button and press the [ENTER]
key to switch between the following two settings.
•.............The pad track can be played.
•.............The pad track is muted.
11
Move the cursor to the track mute button for
the track that you want to mute, and press
the [ENTER] key to switch the button to
(muted).
To cancel muting, move the cursor to the track mute
button and press the [ENTER] key once again.

Here we’ll describe how pad performances (pad events) can be recorded to the pad track via

offline (non-realtime) operation. Since pad events can be recorded at the beginning of each mea-

sure, this method is useful when you want to align pad timing with the top of each measure.

1Either press the Quick Navigate section
[RECORD] key repeatedly, or use the CUR-
SOR [ ]/[ ] keys while holding the
[RECORD] key to select the RECORD
screen PAD page.
2Move the cursor to the GRID button and
press [ENTER].
The GRID REC popup window will appear. The pad
tracks will be displayed on a measure grid.
The grid symbols have the following meanings:
•.................. Measure in which a pad event is
already recorded.
•●.................. Measure in which a pad event has
been recorded via grid recording.
• Blank ........... Measure in which no pad event is
recorded.
3To enter a pad event, move the cursor to the
measure on the grid for which you want to
enter the event, then press the appropriate
pad.
“●” will appear on the grid at the corresponding mea-
sure and pad track.
4Press the pad a second time to turn the
event off.
The symbol at the corresponding grid point will disap-
pear (blank). If a previously-recorded pad event exists
at that point, however, pressing the pad will sequen-
tially select → ● → Blank.
5When you have finished editing, move the
cursor to EXEC and press [ENTER].
The grid recording will be executed, and the popup
window will close.
•If a pad track is muted and the pad is set to LOOP/TRIGGER,
the pad will play if you simply press the [PLAY] key to play
back the recorder. This means that you can use this feature
as a rhythm machine even without recording on a pad track.
HINT

Grid Recording (Step Recording) the Pads

•A maximum of 999 measures can be displayed/edited in the
GRID REC popup window.
NOTE
•Grid recording will not be executed until you move the cursor
to the EXEC button and press the [ENTER] key.
• If you edit a measure in which a pad event has already been
recorded, the results may not always be shown correctly on
the display.
NOTE
Recording/playing a pad performance • Grid Recording (Step Recording) the Pads