Convenient functions during mixdown/bounce operations
9
Mixdown and bounce operations
99
AW1600 Owner’s Manual
1EQ L-MID GAIN
BEQ L-MID FREQ
CEQ L-MID Q
DEQ LOW GAIN
EEQ LOW FREQ
FEQ LOW Q
These specify the gain, frequency, and Q for the LO-
MID and LOW bands of the return channel EQ. The
range of each parameter is the same as in the EDIT
page of the EQ screen.
1PAN L
BPAN R
Independently specify the return channel panning for
the L and R channels.
CRETURN
Adjusts the input level for return channel 1.
5Access the desired return channel page,
move the cursor to a parameter, and turn
the [DATA/JOG] dial.
6To switch effect BYPASS on/off, press the
[ENTER] key.
In the EDIT page, you can press the [ENTER] key to
switch BYPASS on/off regardless of the current loca-
tion.
The chapter “Track recording” explained how to insert an
internal effect into an input channel. In the same way, you
can also insert an effect into a track channel or pad chan-
nel. As an example, here’s how to insert internal effect 1
into a track channel for use during mixdown or bouncing.
1In the Selected Channel section, repeatedly
press the [EFFECT 1] knob or hold down
the [EFFECT 1] knob and use the CURSOR
[ ]/[ ] keys to access the SEND page of
the EFF1 screen.
2Move the cursor to the EFF INSERT field of
the track channel into which you want to
insert an effect, and press the [ENTER] key.
A popup window will appear, asking whether it is ok
to release internal effect 1 from the send/return con-
nection.
3Move the cursor to the OK button and press
the [ENTER] key.
Internal effect 1 will be inserted into the selected track
channel.
4Press the [EFFECT 1] knob twice to access
the LIBRARY page of the EFF1 screen.
4 5 6
2
1 3
1 2 3

Inserting an effect into a track

channel

• If the displayed page is different than shown above, make
sure that a track channel is selected as the object of opera-
tions. (This is indicated in the upper left of the screen.) If an
input channel/pad channel is selected, press any one of the
[TRACK SEL] keys.
NOTE