Yamaha aw1600 1, 2, 3, 4

AW1600 Owner’s Manual

What you can do using editing commands

Track editing

128

Here is the basic procedure for using a track editing com-

mand. The procedure is essentially the same for all track

editing commands.

1In the Work Navigate section, repeatedly

press the [EDIT] key.

The EDIT screen will appear. This screen displays the

following information.

1Editing command

Indicates the currently selected editing command.

BLocator/marker

Indicates the approximate location of the currently set

locate points and markers.

If the current track is selected as the virtual track to be

edited, the approximate range(s) of recorded data will

also be displayed.

CParameters

Sets various parameters (track/virtual track number,

editing region, etc.) required in order to execute the

command. The type of parameters and the ranges of

the settings will depend on the command that is

selected.

DEXEC button

Move the cursor to this button and press the [ENTER]

key to execute the editing command.

2Repeatedly press the [EDIT] key or hold

down the [EDIT] key and use the CURSOR

[ ]/[ ] keys to select the desired editing

command.

The EDIT screen is divided into pages for each editing

command. For example, a screen like the one shown

below will appear if you choose the ERASE com-

mand.

After you choose an editing command, the next step is to

specify the track(s) that will be edited.

3To select the track for editing, move the cur-

sor to the TR (Track) ﬁeld in the lower left of

the EDIT screen, and turn the [DATA/JOG]

dial.

For any command, the TR (Track) ﬁeld will appear in

the lower left of the screen, allowing you to select the

track(s).

In the TR ﬁeld you can select the following types of

data.

• CLIP .............Sound clip

• 1–16 .............An audio track

• 1/2–15/16 .....A pair of adjacent odd-numbered/

even-numbered audio tracks

•ST.................The stereo track

•PAD..............A pad track

• ALL ..............Audio tracks 1–16 and pad tracks 1–4

4Select the virtual track or pad that you want

to edit.

If you selected an audio track (1–16,1/2–15/16, STE-

REO) in step 3, the V (V.TRACK) ﬁeld will appear at

the right, allowing you to select the virtual track num-

ber. Move the cursor to this ﬁeld and select a virtual

track number 1–8.

If you selected PAD in step 3, a ﬁeld allowing you to

select pad number will appear at the right. Move the

cursor to this ﬁeld and select a number 1–4.

Basic procedure for

track editing

■Select the editing command

4 3

1 2

■Select the track(s) to edit

Track number

• The data that can actually be selected will depend on the

command.

NOTE

Virtual track number

Pad number

•For some commands, you will need to specify both source

and destination tracks.

NOTE