Convenient functions during mixdown/bounce operations
9
Mixdown and bounce operations
97
AW1600 Owner’s Manual
1Immediately after recalling a read-only library that
contains dynamics settings, turning the [DYN]
knob will simultaneously adjust multiple parame-
ters to affect the dynamics processing. (The
amount of change will depend on the last-recalled
library.)
BFor a channel for which you edited even one
parameter in the EDIT page of the DYN screen,
turning the [DYN] knob will adjust only the last-
edited parameter. (The last-edited parameter is
remembered for each channel.)
CIf you once again recall a read-only library that
contains dynamics settings, turning the [DYN]
knob will again simultaneously adjust multiple
parameters.
By using the EDIT page of the EFF1 screen or EFF2
screen, you can make detailed edits to the effect parame-
ters of the internal effects 1 and 2.
If an effect is internally connected via send/return in the
mixer section, the parameters (EQ, pan, AUX send, etc.)
of the return channel that processes the return signal can
also be edited in this page.
As an example, here’s how you can edit the settings of
internal effect 1, internally connected via send/return.
1For internal effect 1, recall an effect library
that uses the desired effect type.
You cannot change the effect type (e.g., reverb, delay)
in the EDIT page. You must first recall library settings
that use the desired type.
2In the Selected Channel section, repeatedly
press the [EFFECT 1] knob or hold down
the [EFFECT 1] knob and use the CURSOR
[]/[ ] keys to access the EDIT page of the
EFF1 screen.
The EDIT page lets you edit all of the effect parame-
ters.
1BYPASS ON/OFF button
Switches effect bypass on/off. For effects connected to
the send/return loop, however, this function mutes or
un-mutes the effect rather than turning bypass on or
off.
BTYPE
Indicates the type of the currently selected effect.
CSTEREO/MONO
Indicates whether the effect is stereo or monaural. A
stereo-input effect is indicated by , and a monaural-
input effect is indicated by .

Editing the parameters of an

internal effect

1 5
23 4
•You cannot change the effect type in this page. If you want to
use a different type, you must recall library settings that use
the desired effect type.
NOTE