List of editing commands
135
AW1600 Owner’s Manual
12
Track editing
Adjusts the pitch of the specified region of an audio track,
without changing the length.
Writes the specified region of an audio track to a WAV
file.
Use this when you want to transfer audio data to your
computer so that you can edit the data using a waveform
editing program.
For details on the parameters and procedure for the Export
command, refer to “Exporting WAV files” ( p. 136).
Audio playback performance can be improved by using
this command to merge a number of separate regions (sec-
tions of audio data created in separate recording passes) in
a specified track into one continuous region.
The merge command creates a continuous region from the
beginning of the track to the end of the last region on the
track, and sections of the track that contained no regions
are replaced with audio silence.
Parameter Range Explanation
1 From TR
1–16 A single audio track
1/2–15/16 A pair of adjacent odd-numbered/
even-numbered audio tracks
ST The stereo track
2 From V.TR 1–8 Virtual track number
3 From Start Specify a point Beginning of the edited region
4 From End Specify a point End of the edited region
5 Pitch –12 to +12
semitones
Specify the amount of pitch
change in semitone units
6 Fine
–50 to +50
cents
Specify the amount of pitch
change in one-cent units (1/100th
of a semitone)

PITCH CHANGE

5 6

1 2 3 4
From Start From End
PITCH
CHANGE
From Start From End
PITCH
CHANGE
Parameter list
Parameter Range Explanation
1 From TR
1–16 A single audio track
1/2–15/16 A pair of adjacent odd-numbered/
even-numbered audio tracks
2 From V.TR 1–8 Virtual track number

EXPORT

MERGE

1 2

MERGE
Parameter list