Yamaha aw1600 Direct recording and Bus recording

AW1600 Owner’s Manual
40
5
Track recording
6Assign a name to the song (for details on
assigning a name → p. 25). 7To create the new song, move the cursor to the OK button and press the [ENTER] key.
A new song will be created, and you will return to the
SONG screen LIST page.
Instruments/mics connected to the AW1600 can be assigned to tracks in one of the following two
ways.
With this method, input channels are assigned to tracks in a one-to-one correspondence.
This method requires the same number of tracks as the number of input channels you
use. However, this method has the advantage that you will be free to adjust the volume,
pan (stereo position), and tone of each instrument after it has been recorded.
• If you move the cursor to the CANCEL button (instead of the
OK button) and press the [ENTER] key, you will return to the
SONG screen LIST page without creating a new song.
•You may also edit the song name later (
→ p. 145).
HINT
Direct recording and Bus recording
■Direct recording
Tr a c k 1
Tr a c k 2
Tr a c k 3
Tr a c k 4
Tr a c k 5
Tr a c k 6
Tr a c k 7
Tr a c k 8
Synthesizer/rhythm machine
Mixer section
Input
channels
Stereo output
channel
MIC/LINE
INPUT jacks
Recorder section
Creating a new song • Direct recording and Bus recording