Yamaha aw1600 Using the internal effects via send/return

Using the internal effects via send/return
9
Mixdown and bounce operations
85
AW1600 Owner’s Manual
You can use the internal effects via send/return to add effects to the mixdown. As an example,
here’s how to use internal effect 1 in this way.
The “Track recording” chapter explained how to insert an
internal effect into an input channel by using the input
library. If an insert effect has been inserted in a channel,
you must first “un-insert” that effect (cancel the insertion)
before you can use it in a send/return configuration.
1Press any [INPUT SEL] key to select an
input channel for operations.
2Repeatedly press the [EFFECT 1] knob or
hold down the [EFFECT 1] knob and use the
CURSOR [ ]/[ ] keys to access the SEND
page of the EFF1 screen.
The SEND page of the EFF1 screen will appear.
1EFF INSERT
Inserts/cancels an insert effect for a specific channel.
The display will indicate “on” for a channel into which
an effect is currently inserted.
3Move the cursor to the EFF INSERT field of
the channel into which effect 1 is inserted,
and press the [ENTER] key.
A popup window will ask you to confirm that you
want to cancel (release) the effect insertion.
4Move the cursor to the OK button and press
the [ENTER] key.
Insertion of insert effect 1 into that channel will be
cancelled, and now you are free to use this effect in the
mixer section via send/return.
Here’s how to load an effect library into internal effect 1,
and adjust the level (effect send level) of the signal that is
sent from each channel via effect bus 1 to internal effect 1.
1Repeatedly press the [EFFECT 1] knob or
hold down the [EFFECT 1] knob and use the
CURSOR [ ]/[ ] keys to access the
LIBRARY page of the EFF1 screen.
2Select the effect library that you want to
use, and load it into internal effect 1.
In this example, we will select a reverb-type library.
3Press the [EFFECT 1] knob once to access
the SEND page of the EFF1 screen.
If insert effect 1 is connected via the mixer section
send/return, the following items will be added to the
SEND page of the EFF1 screen.
1EFF
Adjusts the send level of the signal that is sent from
each channel to insert effect 1.
BPRE/POST
Selects the location from which the signal from each
channel will be sent to insert effect 1. Move the cursor
to this area and press the [ENTER] key to switch
between the following two settings.
• PRE (pre-fader)......... The signal from immediately
before the fader will be sent.
• POST (post-fader)..... The signal from immediately
after the fader will be sent.
Using the internal effects via send/return
■Internally connecting an
internal effect via send/return
1
• If the page you see is different than shown above, make sure
that input channels are selected as the object of your opera-
tions. (This is shown in the upper left of the screen.) If track
channels are selected, press one of the [INPUT SEL] keys.
HINT
■Adjusting the effect send level
2
1