AW1600 Owner’s Manual
Restoring songs or sample libraries
13
Song management
154

Here’s how data that you backed up to CD-R/RW media can be restored to the hard disk of the

AW1600.

1Insert the CD-R/RW media containing the
backup data into the CD-RW drive.
If the backup data occupies more than one volume of
media, insert the first volume.
2In the Work Navigate section, press the [CD]
key.
The CD screen will appear.
3Repeatedly press the [CD] key or hold down
the [CD] key and use the CURSOR [ ]/[ ]
keys to access the RESTORE page.
In this page, data that you backed up to CD-R/RW
media can be restored to the internal hard disk.
4Make sure that the cursor is located at the
READ CD INFO button, and press the
[ENTER] key.
Information will be read from the inserted CD-R/RW
media. When the information has been read, a display
like the following will appear.
1List
This area lists the data that has been backed up on the
CD-R/RW media. The symbols at the right of the list
indicate whether an item of data has been selected (●)
or disabled ( ) for restore.
BPAD button
When this button is off, the list will show the songs
that were backed up on the CD-R/RW media. When
this button is on, the list will show the sample libraries
that were backed up on the CD-R/RW media.
CALL button
You can use this button to select all the data that
appears in the list. If you turn this button on and then
turn the ENABLE/DISABLE button on, all data dis-
played in the list will be selected for restore.
DENABLE/DISABLE button
Selects whether an item of data will be selected for
restore (ENABLE) or not selected (DISABLE).
ESYSTEM button
Selects the system data (AW1600 settings you make in
the UTILITY screen) for restoring.
FEXECUTE button
Executes the restore operation
5Turn the [DATA/JOG] dial to select the data
that you want to restore. Then move the
cursor to the ENABLE/DISABLE button and
press the [ENTER] key.
The symbol at the right will change to the ● symbol,
indicating that this data has been selected for restor-
ing.
If you turn on the ALL button and then move the cur-
sor to the ENABLE/DISABLE button and press the
[ENTER] key, all data shown in the list will be
selected in one step.
6If you want to restore the system data,
move the cursor to the SYSTEM button and
press the [ENTER] key.
The button will be turned on, and the system data will
be selected for restoring.
7To execute the restore operation, move the
cursor to the EXECUTE button and press
the [ENTER] key.
A popup window will ask you to confirm the opera-
tion.
Restoring songs or sample libraries
6 54
123
•You cannot operate the items in the RESTORE page until the
inserted CD-R/RW media has been read.
NOTE
• The maximum number of songs or sample libraries that can
be displayed is 100.
NOTE