57
AW1600 Owner’s Manual
6
Overdubbing

A dynamics library can be instantly recalled in the same way as an EQ library.

1In the Selected Channel section, press
down the [DYN] knob and turn it.
When you turn the [DYN] knob to left or right while
pressing it, the LIBRARY page of the DYN screen
will appear.
2Turn the [DATA/JOG] dial to select a DYN
library. Then move the cursor to the
RECALL button and press the [ENTER] key.
The selected library will be loaded.
3If you want to adjust the dynamics effect,
turn the [DYN] knob in the Selected Chan-
nel section.

Here’s how to set the volume balance and pan for the previously-recorded tracks and the tracks

that you now will be overdubbing.

1While you play back the song, raise the
track channel faders for the previously-
recorded tracks to an appropriate monitor-
ing level.
2Press the track channel [TRACK SEL] key
for a previously-recorded track, and use the
[PAN/BAL] knob of the Selected Channel
section to set the pan.
3Stop the recorder, and while producing
sound on your instrument, adjust the fader
of the recording-destination track channel
so that the monitoring level is appropriate.
The track channel for the recording-destination track
will send the input signal to the stereo bus while
recording or stopped, and will send the track playback
signal to the stereo bus during playback. This means
that in order to monitor the input signal, you must stop
the recorder.
4Press the [TRACK SEL] key for the record-
ing-destination track channel, and use the
[PAN/BAL] knob of the Selected Channel
section to set the pan.
In the same way as for the input channel signal, you
can also use EQ and dynamics to process the track
channel. To do this, press the [TRACK SEL] key to
select the track channel, and use the [EQ] knob or
[DYN] knob of the Selected Channel section to recall
a library and adjust the settings. This procedure will
not affect the signal that is recorded on the track.
Instantly recalling a dynamics library
Turn while
pressing
• In the same way, you can press and turn the [EFFECT 1]
knob or [EFFECT 2] knob in the Selected Channel to recall an
effect library.
• If necessary, you can make detailed adjustments to the
dynamics parameters (
→
p. 96).
HINT
Setting the mix balance and pan
• The position of the track channel faders will not affect the
recording level. However if you set the faders to 0 dB, the
playback volume will be the same as when you recorded the
tracks.
HINT
Instantly recalling a dynamics library • Setting the mix balance and pan