Yamaha AW 1600 3, 4, 5

AW1600 Owner’s Manual

Correcting a Vocal Track (Pitch Fix)

Mixdown and bounce operations

3Move the cursor to the PITCH FIX button

and press the [ENTER] key.

A popup window will appear which allows you to

select the source edit track.

4Specify the source edit track in the TRACK

ﬁled, then move the cursor to the OK button

and press the [ENTER] key.

A popup window will appear which allows you to

select the record destination track and the virtual track.

5Specify the record destination track in the

TRACK ﬁeld and the virtual track in the V.TR

ﬁled, then move the cursor to the OK button

and press the [ENTER] key.

This will select the PITCH FIX display.

1EXIT button

Move the cursor to the EXIT button and press

[ENTER] to exit from the PITCH FIX mode and

return to the BOUNCE page.

BBYPASS button

To monitor the vocal track prior to pitch correction,

move the cursor to this button and press [ENTER].

CFrom TR

Indicates the track to be edited (the source track). This

ﬁeld is only for display, and cannot be edited.

DTo TR/V.TR

Indicates the track and virtual track to which the pro-

cessed source track will be recorded (the destination

track). This ﬁeld is only for display, and cannot be

edited.

ECTRL

Selects the method of pitch correction/shift from the

three ways below.

• SCALE ........ Specify the scale via received MIDI

notes to adjust the pitch. For example,

if you play a chord on a connected

MIDI keyboard, the pitch is shifted by

the notes included in the chord.

•NOTE...........The pitch is changed according to the

received MIDI note.

•PANEL.........This lets you adjust the pitch by speci-

fying a scale from the keyboard on the

display.

FTYPE

Sets this to an appropriate value to maximize the accu-

racy of the pitch change of the original signal. Gener-

ally, this should be set to Normal; however, for low

vocals, set this to Male, and for high vocals, set it to

Female.

GDETECT

This determines the time resolution for pitch change.

The shorter the setting, the more quickly the pitch

change is recognized. The longer the setting, the more

slowly pitch changes are made, resulting in more

abrupt, step-like pitch changes.

HRATE

This determines the speed resolution for pitch change.

The faster the setting, the more quickly the pitch is

changed, increasing the apparent effectiveness of the

pitch change function. When this is set to “000,” there

is no pitch change.

IFORMANT

This determines the vocal quality (character) of the

pitch-adjusted signal. Positive (+) values result in a

higher voice quality and negative (–) values result in a

lower voice quality.

JPITCH

This determines the octave setting of the pitch-

adjusted signal. The range is from –2 to 2 octaves in

semitone steps. The integer and fraction segments of

the value are set separately.

KKeyboard

The graphic keyboard can be used to specify notes

when the CTRL parameter is set to PANEL. To turn a

note on or off, move the cursor to the desired note and

press [ENTER].

• Different tracks must be speciﬁed for the source and destina-

tion.

NOTE

1 D 2 EGCH F

I K

The following occur when the PITCH FIX mode is

engaged :

• No other display can be selected from the panel keys.

• Record track assignments are ignored.

• No internal effects other than Pitch ﬁx can be accessed.

• The Tempo Map (scene numbers) is temporarily ignored.

• MIDI program and control change messages cannot be

received.

NOTE