Yamaha AW 1600 Signal ow during bouncing

AW1600 Owner’s Manual
About mixdown and bouncing
9
Mixdown and bounce operations
82
“Bounce” is the process by which the signals recorded on
multiple tracks are mixed to the stereo bus, and re-
recorded on one or two other tracks. (This process is also
called “ping-pong recording.”)
The diagram below shows the signal flow during bounc-
ing. This process differs from mixdown in several points;
you use the L/R bus instead of the stereo bus, only the
track channels are the recording sources, and that the
recording-destination is one or two vacant tracks. This
diagram shows an example in which the track 1–8 signals
are bounced to tracks 9/10. After bouncing, you can
switch the virtual tracks for tracks 1–8, and use these
tracks to record other instrumental performances.
●Signal flow during bouncing
The Pitch Fix function can be used to edit and correct the
pitch and other properties of vocal tracks. Pitch Fix is dif-
ferent from Bounce in that only one source and destina-
tion track can be selected, and that no other effects can be
used while the Pitch Fix function is active.
Track 1
Track 2
Track 3
Track 4
Track 5
Track 6
Track 7
Track 8
Track 9
Track 10
Recorder section
Mixer section
Buses L/R
Track
channels
Stereo
output
channel