ID function
You can change the remote control ID to prevent unwanted operation of the other Yamaha player such as DVD player. If you have changed the remote control ID, make sure that you select the same ID for the main unit. The default setting is ID1.
1Remote control setting
To change the ID from ID1 to ID2, press and hold the red color button and 2 of number button simultaneously for 7 seconds. To change the ID from ID2 to ID1, press and hold the red color button and 1 of number button simultaneously for 7 seconds.
2Main unit setting
Press and hold 
and 
on the front panel simultaneously for 2 seconds to display current ID when:
–No disc is inserted in this Player.
–The disc tray is closed.
–Playback is stopped.
–“NO DISC” is displayed on the front panel display.
Keep pressing and holding the keys for another 2 seconds to change the ID between ID1 and ID2.
Notes
–If the remote control is without batteries for a few minutes or if exhausted batteries remain in the remote control, the remote control ID is automatically set to ID1. If you want to use the remote control in ID2 setting, install new batteries and set the remote control ID again.
–When this Player is reset, its remote control ID will be ID1.
Controls and functions
1
Introduction
English