Connection Setting
You can select a network connection method.
Wired* | Connects the network using Ethernet. |
Wireless | Connects the network using a wireless LAN. |
| You can select settings for a wireless LAN |
| connection. Follow the |
| proceed. |
| Scan |
| Searches for an access point. You can connect the |
| access point that is found. |
| Manual |
| You can manually set information for an access |
| point. |
Information
You can display network information screen. On this screen, you can view the information of Interface (Ethernet), Address Type, IP Address, Subnet Mask, Default Gateway, and DNS.
Connection Test
You can perform an internet connection test. If the test is failed, please check “IP Setting” (p. 35) and perform the test again.
IP Setting
You can configure the network settings.
Auto* | Select to automatically configure the network |
| settings of this Player with the DHCP server. |
Manual | Select to configure the network settings (IP Address, |
| Subnet Mask, Default Gateway, and DNS) manually. |
Hints
– Numeric keys Enters characters.
– 2/3 | Moves the highlight. |
– CLEAR | Deletes a character. |
– ENTER | Saves the settings and exits from |
| the menu. |
You can set access restriction to
Permitted | Allows all |
Partial | Allows only discs with owner certification. |
Permitted* |
|
Prohibited | Prohibits all |
DLNA
You can set the DLNA (p. 44) to Enable/Disable. When you do not use the DLNA function, set to Disable.
Enable*, Disable
Proxy Setting
You can set Proxy Setting. Set to Disable for normal use. Set to Enable to set the proxy setting.
Enable | Enables proxy host and proxy port setting. |
Disable* | Sets proxy server to disable. Select this item when |
| proxy server is not used. |
Proxy Host | Sets proxy host. |
Proxy Port | Sets proxy port. |
SETUP menu
■Display Setting
The default settings are marked with “ * ”.
TV
3D Output
You can select 3D or 2D video output from this Player.
Auto* | This Player automatically selects 3D or 2D videos. |
| |
Off | This Player always selects 2D videos. |
| |
|
|
|
|
| Note |
|
|
| 4 | ||
| – Even if you set “3D Output” to “Auto” and play | ||
| back a | Settings | |
|
|
| |
images depending on the connection and the setting of TV, etc (p. 14).
TV Screen
You can set the screen aspect ratio of the connected TV, and adjust the video output.
If you switch your TV (i.e. because you have bought a new one) and the screen aspect ratio of the connected TV changes, you will have to change the TV Screen setting.
16:9 Full Select this when this Player is connected to a TV with a 16:9 screen. When a 4:3 aspect ratio video is played back, the video is displayed as shown below.
16:9 Normal* Select this when this Player is connected to a TV with a 16:9 screen. When a 4:3 aspect ratio video is played back, the video is displayed as shown below.
4:3 Pan Scan Select this when this Player is connected to a TV with a 4:3 screen. When a 16:9 aspect ratio video is played back, the video is displayed as shown below.
4:3 Letter Box Select this when this Player is connected to a TV with a 4:3 screen. When a 16:9 aspect ratio video is played back, the video is displayed as shown below.
Original | On 16:9 (wide screen) TV | English | ||
image size | 16:9 Full | 16:9 Normal | ||
| ||||
4:3 |
|
|
| |
Original | On 4:3 TV |
| ||
image size | 4:3 Pan Scan | 4:3 Letter Box |
| |
16:9