Other connections

■Connecting to the REMOTE CONTROL jacks

–You can transmit and receive the remote control signals by connecting to the REMOTE CONTROL (OUT/IN) jacks.

–Firmly connect monaural 3.5 mm mini plug cables (commercially available) to the REMOTE CONTROL (OUT/IN) jacks.

–If your AV receiver is a Yamaha product and has the capability to transmit SCENE control signals, you can control the Player with the SCENE function.

Caution!

Do not connect the power cable of this Player until all connections are completed.

This Player

 

OUT

IN

RS-232C

R

L

REMOTE CONTROL

 

 

AUDIO OUT

Hints

–For details about the SCENE function, refer to the owner’s manual supplied with your Yamaha AV receiver.

–You can connect a Yamaha component (such as CD player) supports the SCENE function to the REMOTE CONTROL (OUT) jack of this Player.

–The RS-232C terminal is a control expansion terminal for commercial use. Consult your dealer for details.

■Connecting the power cable

–After all connections are completed, plug the supplied power cable into the AC IN on the rear of the Player. Then plug into AC outlet.

AC IN

2

Connection

To REMOTE CONTROL (OUT) jack

Monaural 3.5 mm mini plug cable (commercially available)

To remote control in jack

To REMOTE

CONTROL (IN) jack

Monaural 3.5 mm mini plug cable (commercially available)

To remote

control out jack

To AC inlet

To AC outlet

Note

–TO PREVENT RISK OF ELECTRIC SHOCK, DO NOT TOUCH THE UN-INSULATED PARTS OF ANY CABLES WHILE THE POWER CABLE IS CONNECTED.

English

REMOTE CONTROL IN

REMOTE CONTROL OUT

Yamaha component Infrared signal receiver or Yamaha component (such as AV receiver)

19 En