SETUP menu

Video Out Select

You can select the video output resolution from HDMI, COMPONENT, and VIDEO. For more details on output formats, refer to “About the video output formats” (p. 39).

HDMI

When set to Auto, resolution is set to the maximum

 

resolution according to the connected TV.

 

When set to Disc Native, the original resolution and

 

video frequency, recorded in the Blu-ray Disc or

 

DVD that is played back, are used. You can use a

 

video up-converter function of an external device.

 

When other than a Blu-ray Disc or DVD is played

 

back, the resolution and video frequency will work

 

as Auto.

 

If a Blu-ray Disc or DVD whose resolution and

 

video frequency are not compatible with the

 

connected TV, no image will be output. In this case,

 

stop playback, and select an option other than Disc

 

Native.

 

Auto*, Disc Native, 480i/576i, 480p/576p,

 

720p, 1080i, 1080p

COMPONENT You can select only 480p/576p or 480i/576i.

 

480p/576p, 480i/576i*

VIDEO

This works as same as 480i/576i.

Notes

–To output HD audio (Dolby TrueHD or DTS-HD Master Audio) from HDMI terminal, set Video Out Select to Auto or more than 720p.

–If a TV is connected with an HDMI cable, default setting will be HDMI.

–If a TV is not connected with an HDMI cable, default setting is VIDEO.

TV System

You can select TV System from PAL, NTSC and Multi. Set the same TV System as your TV set. For more details on output formats, refer to “About the video output formats” (p. 39).

NTSC, PAL, Multi

(The default setting differs depending on your model.)

Color Space

You can select the Color Space (p. 44) output from HDMI. This function is available when this Player is connected with an HDMI cable.

YCbCr 4:4:4* Sets Color Space to YCbCr 4:4:4.

YCbCr 4:2:2 Sets Color Space to YCbCr 4:2:2.

Full RGB When RGB is set and white and black on the screen are too faint, select this item. This setting is effective when a connected component supports RGB 0–255 range.

RGB

Outputs video signal at normal signal range.

Note

–This function is only available on TVs that support this function.

HDMI Deep Color

When your TV and/or AV receiver is compatible with Deep Color (p. 44), set this item according to your TV/AV receiver. This function is available when this Player is connected with an HDMI cable.

30 bits, 36 bits, 48 bits, Off*

HDMI 1080p 24Hz

This outputs the BD-Video encoded in 24Hz frame rate in HDMI 1080p 24Hz. Smoother video playback may be available with this function. This function is available when your TV/AV receiver support this function, and this Player is connected with an HDMI cable. For more details on output formats, refer to “About the video output formats” (p. 39).

Auto*, Off

Note

–This setting is disabled when output resolution is other than 1080p.

Lip Sync

You can set/adjust the Lip Sync (p. 45) function.

Auto*

This Player adjusts the Lip Sync function

 

automatically.

Manual

You can adjust the Lip Sync function manually. You

 

can set the delay of the audio for 2D and 3D contents

 

independently.

 

2D

 

3D

Off

This Player does not adjust the Lip Sync function.

Video Process

Video Mode

You can select Video Mode below.

Standard*

The image is most natural and well-balanced. This

 

mode suits for normal use.

Vivid

The image is more vivid and sharp.

Cinema

The image suits for watching movie in dark room.

Custom

You can adjust the visual image manually. Press

 

5/a to select the parameter, then press 2/3 to

 

adjust the figure.

 

Brightness

 

Adjusts the overall brightness of the image.

 

Saturation

 

Adjusts the richness of the color in the projected

 

image.

 

Hue

 

Adjusts the tint of the projected image.

 

Contrast

 

Adjusts the bright areas (white levels) in the image.

 

Sharpness

 

Adjusts the sharpness of objects in the video.

 

CTI

 

Smoothes out the edges of color images. Color

 

images are rendered more distinct.

 

The default settings are 0.

36 En