Noise Reduction

You can set the Noise Reduction to a level of 0 to 3. 0 is off, and 3 is the maximum level.

0, 1, 2*, 3

De-interlacing Mode

You can select how to detect the video signal. Set to Auto for normal use. When horizontal stripping noise appears on the screen, set this to Film/Video to remove the noise.

Auto*, Film, Video

■Audio Setting

The default settings are marked with “ * ”.

Audio Output

Coaxial / Optical

You can select the output mode of COAXIAL jack and OPTICAL terminal. For more details on output formats, refer to “About the audio output formats” (p. 38).

Bitstream Outputs digital signal without any processing. Secondary Audio is not output.

PCM Outputs 2-channel PCM.

Reencode* Outputs Bitstream with Secondary Audio.

Off

Mutes sound.

HDMI

You can select the output mode of HDMI terminal. For details on setting items, see “Coaxial / Optical” (p. 37). For more details on output formats, refer to “About the audio output formats” (p. 38).

Bitstream*, PCM, Reencode, Off

Note

–To output HD audio (Dolby TrueHD or DTS-HD Master Audio) from HDMI terminal, set Video Out Select to Auto or more than 720p (p. 36).

Downsampling

You can select digital audio signal down-sample frequency. This function is effective for the audio signal output from the COAXIAL jack/OPTICAL terminal.

48K*

The highest sampling rate of digital PCM output is

 

48 kHz.

96K

The highest sampling rate of digital PCM output is

 

96 kHz.

192K

The highest sampling rate of digital PCM output is

 

192 kHz.

DRC

You can set the DRC (Dynamic Range Compression) (p. 44) to on/off/Auto. When set to Auto, DRC is automatically turned on for a source with DRC information in Dolby TrueHD format. DRC makes the strong sound such as plosive sound lower, and conversations more audible. It is useful when you watch movies in the night.

Off, On, Auto*

SETUP menu

SACD Output

Output Priority

You can select the output priority from HDMI or Analog for playing back SA-CDs.

HDMI*

The settings for SACD Priority and HDMI Output

 

 

 

are applied.

 

Analog

Always plays back the SA-CD’s high quality 2-

 

 

 

channel area. The signal is fully optimized for analog

 

 

 

2-channel outputs to be best quality.

 

 

 

 

 

 

 

 

4

 

Note

 

 

– Selecting Analog mutes the HDMI output when SA-

Settings

 

 

 

CD is played back. See page 38 for information on the SA-CD output formats.

SACD Priority

Selects the playing back priority for 2-channel contents or multi-channel contents, when the disc contains both types of contents.

Multi-ch*, 2-ch

HDMI Output

You can select audio signal output from HDMI terminal when SA-CD is played back.

DSD*

Outputs DSD raw signal. When this Player is

 

connected to DSD compatible AV receiver, this item

 

is recommended.

PCM

Outputs PCM signal decoded by this Player.

Speaker Setting

 

2ch Downmix

 

You can select down mix method to analog 2-ch from

 

Stereo or Lt/Rt.

English

Lt/Rt

Pro Logic decoder. Sound from rear speakers is

Select this item if this unit is connected to a Dolby

 

Stereo*

mixed to the 2-ch stereo sound.

 

 

Changes channel output to stereo, which only

 

 

delivers sound from the two front speakers.

 

Post Process

UpMix

You can multi-channelize the 2-channel audio signal. To multi-channelize, select DTS NEO:6, then select Cinema or Music mode.

Off*, DTS NEO:6

■System Information

Software version and MAC address (p. 45) are displayed.

37 En