App-6
1.4.5 Main Volume
Messages which control the volume of each Part.
CNTRL# PARAMETER DATA RANGE
7 Main Volume 0…127
A setting of 0 = minimum volume, and 127 = maximum volume.
1.4.6 Pan
Messages which control the stereo panning position of each Part.
CNTRL# PARAMETER DATA RANGE
10 Pan 0…127
A setting of 0 = extreme left position, and 127 = extreme right
position.
1.4.7 Expression
Messages which control intonation expression of each Part.
CNTRL# PARAMETER DATA RANGE
11 Expression 0…127
A setting of 0 = minimum expression volume, and 127 = maxi-
mum expression volume.
1.4.8 Hold1
Messages which control sustain on/off.
CNTRL# PARAMETER DATA RANGE
64 Hold1 0…127
Settings between 0 – 63 = sustain off, and settings between 64 –
127 = sustain on.
1.4.9 Portamento
Messages which control portamento on/off.
CNTRL# PARAMETER DATA RANGE
65 Portamento 0…127
Settings between 0 – 63 = portamento off, and settings between 64
– 127 = portamento on.
The parameter 1.4.3 Portamento Time controls the portamento
speed.
1.4.10 Sostenuto
Messages which control sostenuto on/off.
CNTRL# PARAMETER DATA RANGE
66 Sostenuto 0…127
Holding specific notes and then pressing and holding the sostenuto
pedal will sustain those notes as you play subsequent notes, until
the pedal is released.
Settings between 0 – 63 = sostenuto off, and settings between 64 –
127 = sostenuto on.
1.4.11 Soft Pedal
Messages which control soft pedal on/off.
CNTRL# PARAMETER DATA RANGE
67 Soft Pedal 0…127
Notes played while holding the soft pedal will be dampened.
Settings between 0 – 63 = soft pedal off, and settings between 64 –
127 = soft pedal on.
1.4.12 Harmonic Content
Messages which adjust the resonance set for each Voice.
CNTRL# PARAMETER DATA RANGE
71 Harmonic Content 0…127 (0:-64, 64:+0, 127:+63)
The value set here is an offset value which will be added to or
subtracted from the Voice data.
Higher values will result in a more characteristic, resonant sound.
Depending on the Voice, the effective range may be narrower than
the range available for adjustment.
1.4.13 Release Time
Messages which adjust the envelope release time set for each Voice.
CNTRL# PARAMETER DATA RANGE
72 Release Time 0...127 (0:-64, 64:+0, 127:+63)
The value set here is an offset value which will be added to or
subtracted from the Voice data.
1.4.14 Attack Time
Messages which adjust the envelope attack time set for each Voice.
CNTRL# PARAMETER DATA RANGE
73 Attack Time 0...127 (0:-64, 64:+0, 127:+63)
The value set here is an offset value which will be added to or
subtracted from the Voice data.
1.4.15 Brightness
Messages which adjust the filter cutoff frequency set for each Voice.
CNTRL# PARAMETER DATA RANGE
74 Brightness 0...127 (0:-64, 64:+0, 127:+63)
The value set here is an offset value which will be added to or
subtracted from the Voice data.
Lower values will result in a softer sound.
Depending on the Voice, the effective range may be narrower than
the range available for adjustment.
1.4.16 Portamento Control
Messages which apply a portamento between the currently-sound-
ing note and the subsequent note.
CNTRL# PARAMETER DATA RANGE
84 Portamento Control 0...127
Portamento Control is transmitted specifying the Note On Key of
the currently-sounding note.
Specify a Portamento Source Key number between 0 – 127.
When a Portamento Control message is received, the currently
sounding pitch will change with a Portamento Time of 0 to the next
Key On key on the same channel.
For example, the following settings would apply a portamento from
note C3 to C4.
90 3C 7F ...... C3 = Key On
B0 54 3C...... Source Key number set to C3
90 48 7F ...... C4 = Key On (When C4 = on, C3 is raised by a
portamento to C4.)
Even if the Multi Part parameter Rcv PORTAMENTO (page App-
14) = OFF, the Portamento Control message will be received .
MIDI Data Format