App-15
Address Size Data Parameter Description
(H) (H) (H)
nn 66 1 00 - 7F AC2 LFO AMOD DEPTH 0 - 127 00
nn 67 1 00 - 01 PORTAMENTO SWITCH 0:OFF, 1:ON 00
nn 68 1 00 - 7F PORTAMENTO TIME 0 - 127 00
nn 69 1 00 - 7F PITCH EG INITIAL LEVEL -64 - +63 40
nn 6A 1 00 - 7F PITCH EG ATTACK TIME -64 - +63 40
nn 6B 1 00 - 7F PITCH EG RELEASE LEVEL -64 - +63 40
nn 6C 1 00 - 7F PITCH EG RELEASE TIME -64 - +63 40
nn 6D 1 01 - 7F VELOCITY LIMIT LOW 1 - 127 01
nn 6E 1 01 - 7F VELOCITY LIMIT HIGH 1 - 127 7F
TOTAL SIZE 3F
nn = Part Number (0 : Part 1, 1 : Part 2, 2 : Part 3, ... , 15 : Part 16)
For the DRUM PART, the following parameters have no effect.
• SOFT PEDAL • BANK SELECT LSB • MONO/POLY • SCALE TUNING • PORTAMENTO
• POLY AFTER TOUCH • PITCH EG INITIAL LEVEL • PITCH EG ATTACK TIME • PITCH EG RELEASE LEVEL • PITCH EG RELEASE TIME
Table 1-6

MIDI Parameter Change table ( DRUM SETUP ) [XG]

Address Size Data Parameter Description Default
(H) (H) (H) value(H)
3n rr 00 1 00 - 7F PITCH COARSE -64 - +63 40
3n rr 01 1 00 - 7F PITCH FINE -64 - +63[cent] 40
3n rr 02 1 00 - 7F LEVEL 0 - 127 depend on the note
3n rr 03 1 00 - 7F ALTERNATE GROUP 0:OFF, 1 - 127 depend on the note
3n rr 04 1 00 - 7F PAN 0:random, L63...C...R63 (1...64...127) depend on the note
3n rr 05 1 00 - 7F REVERB SEND 0 - 127 depend on the note
3n rr 06 1 00 - 7F CHORUS SEND 0 - 127 depend on the note
3n rr 07 1 00 - 7F VARIATION SEND 0 - 127 7F
3n rr 08 1 00 - 01 KEY ASSIGN 0:SINGLE, 1:MULTI 00
3n rr 09 1 00 - 01 Rcv NOTE OFF 0:OFF, 1:ON depend on the note
3n rr 0A 1 00 - 01 Rcv NOTE ON 0:OFF, 1:ON 01
3n rr 0B 1 00 - 7F FILTER CUTOFF FREQUENCY -64 - +63 40
3n rr 0C 1 00 - 7F FILTER RESONANCE -64 - +63 40
3n rr 0D 1 00 - 7F EG ATTACK RATE -64 - +63 40
3n rr 0E 1 00 - 7F EG DECAY1 RATE -64 - +63 40
3n rr 0F 1 00 - 7F EG DECAY2 RATE -64 - +63 40
TOTAL SIZE 10
[Note] n : Drum Setup number (0, 1)
rr : note number (0D - 5B)
When XG system on or GM mode on messages are received, all Drum Setup parameters are initialized.
The Drum Setup Reset message can be used to initialize each Drum Setup parameter.
Selecting a Drum Set will cause the Drum Setup parameter values to be initialized.
MIDI Data Tables