Before Use
System Requirements
When the CRW-70 drive is connected to a computer and used as a CD-R/ RW drive, the system environments must satisfy the following conditions. If your computer does not meet the requirements listed below, the CRW-70 drive may not be able to write at the maximum speed.
Hardware
•PC/AT-compatible computer
•CPU: Pentium II-class or higher, 300 MHz or faster
•RAM: 64 MB or more
•USB port (USB 2.0 compatible)
•A spare PCI expansion slot or a CardBus slot for a USB interface card (if there is a need to install an USB interface card in your computer)
•CD-ROM drive
Notes
•To install the device drivers, you need a CD-ROM drive other than the CRW-70 drive.
•The CRW-70 drive cannot be used as a boot drive. Furthermore, the CRW-70 drive cannot be used to set up the operating system one more time.
•For Windows XP, use a RAM of 128 MB or more.
USB interface card
Your computer requires a USB port in order to connect the CRW-70 drive. To fully utilize the performance of the CRW-70 drive, a USB 2.0 compatible interface card and EHCI (Enhanced Host Controller Interface) compliant driver are also necessary. If your computer has a USB port with USB 1.1 specifications, YAMAHA recommend that you install a USB 2.0 compatible interface card.
Notes
•For the latest information about USB 2.0 interface cards already checked for compatibility with your drive, go to the YAMAHA CD-R/RW Drive web site. URL: http://www.yamaha.co.jp/english/product/computer/
•For information on how to purchase an EHCI compliant driver for the USB interface card, or information about the operating system supporting the card, go to the interface card manufacturer’s web site or contact user support services.