Using the CRW-70 Drive as a CD-R/RW Drive (When Connected to a Computer)

STEP 4 Install the CD Writing Software

Install the CD writing software that came with the CRW-70 drive. For details about how to install and use the software, refer to the documentation that came with it.

Disconnecting the CRW-70 Drive

The CRW-70 drive can be connected to or disconnected from your computer even when the computer is turned on (hot plug).

When removing the CRW-70 drive with the computer turned on, or when turning off the drive with the computer connected, follow the steps below.

1

2

3

Exit the CD writing software, if it is running.Be sure to remove the disc from the drive, if a disc is loaded.

With Windows 98 Second Edition, you can disconnect the drive. With Windows Me/2000 Professional or Windows XP, start “Unplug or Eject Hardware” or “Safety Remove Hardware” on the taskbar, respectively, and then perform the necessary steps to disconnect the drive.

* This screen is an example on Windows Me.

Note

When writing, be sure not to disconnect the USB cable from the CRW-70 drive, or to disconnect or connect any USB devices from/to the computer.

24